| Numéro d'article | TM104TFH01 |
| Marque | Tianma |
| Taille | 10.4 |
| application | DPF |
| Résolution | 1024×768 |
| Composition | CELL |
| Luminosité | 0 |
| CR | 1000:1 |
| Couleurs | 262K |
| Rétroéclairage | No B/L |
| Interface | RSDS |
| marque de panneau | TIANMA |
| modèle de panneau | TM104TFH01 |
| type de panneau | a-Si TFT-LCD , CELL |
| taille du panneau | 10.4 inch |
| résolution | 1024(RGB)×768 , XGA |
| mode d'affichage | TN, Normally White, Transmissive |
| zone active | 210.4×157.8 mm |
| contour | 220.5×168 mm |
| surface | Antiglare, Hard coating (3H) |
| profondeur de verre | 0.50+0.50 mm |
| Rapport de contraste | 1000:1 (Typ.) |
| couleurs d'affichage | 262K (6-bit), CIE193162% |
| Temps de réponse | 16/21 (Typ.)(Tr/Td) |
| angle de vue | 75/75/70/75 (Typ.)(CR≥10)(L/R/U/D) |
| fréquence | 60Hz |
| interface de signaux | RSDS (1 Channel), 100 pins |
| tension d'entrée | 3.3/10.8/20.0/-7.0V (Typ.)(VCC/AVDD/VGG/VEE) |
| KHB104SV1AD-G83 | Kyocera | 10.4 | 800×600 |
| LQ104S1DG2A | SHARP | 10.4 | 800×600 |
| LQ104S1DG31 | SHARP | 10.4 | 800×600 |
| LQ104S1LG31 | SHARP | 10.4 | 800×600 |
| TM104QDSG09 | Tianma | 10.4 | 640×480 |
| TM104SBH01 | Tianma | 10.4 | 800×600 |
| TM104SCH02 | Tianma | 10.4 | 800×600 |
| TM104SDH01 | Tianma | 10.4 | 800×600 |
| TM104SDH02 | Tianma | 10.4 | 800×600 |
| TM104SDHG30 | Tianma | 10.4 | 800×600 |
| A070SN02 V0 CELL | AUO | 7.0 | 800×600 |
| AT080TN01 | Innolux | 8.0 | 800×480 |
| AT090TN12 V.3 | Innolux | 9.0 | 800×480 |
| CLAA104XA01CW | CPT | 10.4 | 1024×768 |
| LQ070Y3DG02 | SHARP | 7.0 | 800×480 |
| PA079DS1T2 | E Ink | 7.9 | 480×234 |
| PM070WM3 | E Ink | 7.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| TM070RDH10 | Tianma | 7.0 | 800×480 |
| TR-LM7WR3PS | Panasonic | 7.0 | 480×234 |