| Numéro d'article | TM035QV-67P06D |
| Marque | SANYO |
| Taille | 3.5 |
| application | HHP |
| Résolution | 240×320 |
| Composition | LCM |
| Luminosité | 100 |
| CR | 90:1 |
| Couleurs | 262K |
| Rétroéclairage | WLED |
| Interface | TTL |
| marque de panneau | SANYO |
| modèle de panneau | TM035QV-67P06D |
| type de panneau | a-Si TFT-LCD , LCM |
| taille du panneau | 3.5 inch |
| résolution | 240(RGB)×320 , QVGA |
| mode d'affichage | TN, Normally White, Transflective |
| zone active | 53.64×71.52 mm |
| contour | 66.2×91×4.7 mm |
| surface | Hard coating (3H) |
| luminosité | 100 cd/m² (Typ.) |
| Rapport de contraste | 90:1 (Typ.)(Transmissive)12:1 (Typ.)(Reflective) |
| couleurs d'affichage | 262K (6-bit) |
| Temps de réponse | 10/10 (Typ.)(Tr/Td) |
| angle de vue | 50/50/40/40 (Typ.)(CR≥2)(L/R/U/D) |
| fréquence | 60Hz |
| type de lampe | 3S2PWLEDWithout Driver |
| interface de signaux | Parallel RGB (1 ch, 6-bit), 45 pins |
| tension d'entrée | 3.3/5.0/15.0/-10.0V (Typ.)(VDD/VCC/VGH/VGL) |
| AM-320480-035BT | Other | 3.5 | 320×480 |
| DLC0350AMG-4 | Other | 3.5 | 320×240 |
| EL160.80.50 ET | Lumineq | 3.5 | 160×80 |
| EL160.80.50 IN | Lumineq | 3.5 | 160×80 |
| LQ035Q3DG02A | SHARP | 3.5 | 320×240 |
| LS035Y8DX02A | SHARP | 3.5 | 480×800 |
| NL2432DR22-02B | NLT | 3.5 | 240×320 |
| NL2432HC22-50B | NLT | 3.5 | 240×320 |
| PD035OX4 | E Ink | 3.5 | 320×234 |
| TX09D30VM1CCA | KOE | 3.5 | 240×320 |
| 24QVF1J | SII | 2.4 | 240×320 |
| COM35H3M10XTC | ORTUSTECH | 3.5 | 240×320 |
| COM41H4M31XLC | ORTUSTECH | 4.1 | 320×240 |
| DLC0200EUG | Other | 2.0 | 240×320 |
| DLC0430NZG-T-1 | Other | 4.3 | 480×272 |
| LQ030B7DD01 | SHARP | 3.0 | 320×320 |
| PD035VX8 | E Ink | 3.5 | 480×640 |
| PD035VX9 | E Ink | 3.5 | 480×640 |
| TFTMD030035 | JDI | 3.0 | 640×480 |
| TM035NDH04 | Tianma | 3.5 | 272×480 |