| Numéro d'article | T-51512D121J-FW-A-AB |
| Marque | Kyocera |
| Taille | 12.1 |
| application | IA |
| Résolution | 800×600 |
| Composition | LCM |
| Luminosité | 400 |
| CR | 500:1 |
| Couleurs | 262K |
| Rétroéclairage | CCFL |
| Interface | TTL |
| marque de panneau | OPTREX |
| modèle de panneau | T-51512D121J-FW-A-AB 1 Compatible model |
| type de panneau | a-Si TFT-LCD , LCM |
| taille du panneau | 12.1 inch |
| résolution | 800(RGB)×600 , SVGA |
| mode d'affichage | TN, Normally White, Transmissive |
| zone active | 246×184.5 mm |
| contour | 280×210×12.5 mm |
| surface | Antiglare, Hard coating (3H) |
| luminosité | 400 cd/m² (Typ.) |
| Rapport de contraste | 500:1 (Typ.) |
| couleurs d'affichage | 262K (6-bit) |
| Temps de réponse | 10/30 (Typ.)(Tr/Td) |
| angle de vue | 65/65/45/75 (Typ.)(CR≥10)(L/R/U/D) |
| fréquence | 60Hz |
| type de lampe | 2 pcsCCFLWithout Driver |
| interface de signaux | CMOS (1 ch, 6-bit), 41 pins |
| tension d'entrée | 3.3/5.0V (Typ.)(VCC) |
| BA121S01-100 | BOE | 12.1 | 800×600 |
| CLAA121UA01CW | CPT | 12.1 | 1600×900 |
| LQ121K1LG52 | SHARP | 12.1 | 1280×800 |
| LQ121X3LG02 | SHARP | 12.1 | 1024×768 |
| LT121SU-121 | Samsung | 12.1 | 800×600 |
| LTM12C278F | TOSHIBA | 12.1 | 800×600 |
| LTM12C505T | TOSHIBA | 12.1 | 1024×768 |
| LTN121AP03-002 | Samsung | 12.1 | 1280×800 |
| LTN121W3-L01 | Samsung | 12.1 | 1280×800 |
| NL8060BC31-47D | NLT | 12.1 | 800×600 |
| AA070ME01-DA1 | Mitsubishi | 7.0 | 800×480 |
| AA104SH02 | Mitsubishi | 10.4 | 800×600 |
| AG-320240A4FIQW-K9H-S(N)(R) | AMPIRE | 5.7 | 320×240 |
| G121SN01 V0 | AUO | 12.1 | 800×600 |
| G170J1-LE1 | Innolux | 17.0 | 1920×1200 |
| HM150X01-101 | BOE | 15.0 | 1024×768 |
| LQ10D32M | SHARP | 10.4 | 640×480 |
| LQ150X1LW96 | SHARP | 15.0 | 1024×768 |
| NL10276BC12-02 | NLT | 6.3 | 1024×768 |
| NL6448BC26-15 | NLT | 8.4 | 640×480 |