| Numéro d'article | L5S30878P00 |
| Marque | Epson |
| Taille | 3.0 |
| application | HHP |
| Résolution | 240×400 |
| Composition | LCM |
| Luminosité | 200 |
| CR | 180:1 |
| Couleurs | 262K |
| Rétroéclairage | WLED |
| Interface | TTL |
| marque de panneau | Epson |
| modèle de panneau | L5S30878P00 |
| type de panneau | a-Si TFT-LCD , LCM |
| taille du panneau | 3.0 inch |
| résolution | 240(RGB)×400 , WQVGA |
| mode d'affichage | TN, Normally White, Transflective |
| zone active | 39.24×65.4 mm |
| contour | 45.15×76.6×4.32 mm |
| surface | |
| luminosité | 200 cd/m² (Typ.) |
| Rapport de contraste | 180:1 (Typ.)(Transmissive)18:1 (Typ.)(Reflective) |
| couleurs d'affichage | 262K (6-bit), CIE193137% |
| Temps de réponse | 6/25 (Typ.)(Tr/Td) |
| angle de vue | 45/60/60/45 (Typ.)(CR≥10)(L/R/U/D) |
| fréquence | 60Hz |
| type de lampe | 3S2PWLEDWithout Driver |
| interface de signaux | Parallel RGB (1 ch, 6-bit) + SPI, 45 pins |
| tension d'entrée | 3.0/3.0V (Typ.)(VDD/VDDI) |
| A030DW01 V1 | AUO | 3.0 | 320×240 |
| C-51505NFQJ-LW-ALN | Kyocera | 3.0 | 20×2 |
| COM30T3N64ZLG | ORTUSTECH | 3.0 | 320×240 |
| DMC-20261NYJ-LY-CDE-CKN | Kyocera | 3.0 | 20×2 |
| L5S30341P00 | SANYO | 12.1 | 800×600 |
| L5S30883P00 | SANYO | 4.5 | 480×240 |
| LS030B3UW01 | SHARP | 3.0 | 240×400 |
| LS030B3UX01D | SHARP | 3.0 | 240×400 |
| LS030Y3DX01 | SHARP | 3.0 | 480×800 |
| TM030CDH51-00 | Tianma | 3.0 | 320×240 |
| 24QVF1J | SII | 2.4 | 240×320 |
| 32NHF0H | SII | 3.2 | 360×640 |
| 32WQF0H | SII | 3.2 | 240×400 |
| AM-320240-015A | Other | 1.5 | 320×240 |
| COM24H2N62XLC | ORTUSTECH | 2.4 | 240×320 |
| DLC0200EUG | Other | 2.0 | 240×320 |
| LQ030B7DD01 | SHARP | 3.0 | 320×320 |
| LQ038Q7DB03A | SHARP | 3.8 | 240×320 |
| LQ043T1DG03 | SHARP | 4.3 | 480×272 |
| LS037V7DW03A | SHARP | 3.7 | 480×640 |