| Numéro d'article | CLAP080MD01CW |
| Marque | CPT |
| Taille | 8.0 |
| application | DPF |
| Résolution | 800×600 |
| Composition | CELL |
| Luminosité | 0 |
| CR | 500:1 |
| Couleurs | 262K/16.2M |
| Rétroéclairage | No B/L |
| Interface | TTL |
| marque de panneau | CPT |
| modèle de panneau | CLAP080MD01CW |
| type de panneau | a-Si TFT-LCD , CELL |
| taille du panneau | 8.0 inch |
| résolution | 800(RGB)×600 , SVGA |
| mode d'affichage | TN, Normally White, Transmissive |
| zone active | 162×121.5 mm |
| surface | Antiglare, Hard coating (3H) |
| profondeur de verre | 0.50+0.50 mm |
| transmissivité | 5.9% (Typ.)(with Polarizer) |
| Rapport de contraste | 500:1 (Typ.) |
| couleurs d'affichage | 262K/16.2M (6-bit / 6-bit + Dithering), CIE193150% |
| Temps de réponse | 25 (Typ.)(Tr+Td) |
| angle de vue | 70/70/50/70 (Typ.)(CR≥10)(L/R/U/D) |
| interface de signaux | TTL (1 ch, 6/8-bit), 50 pins |
| tension d'entrée | 3.3/9.6/18/-6V (Typ.)(VCC/AVDD/VGH/VGL) |
| AT080TN03 V.7 | Innolux | 8.0 | 800×480 |
| AV080WSM-NW0 | BOE | 8.0 | 1024×600 |
| AV080WSM-NW3 | BOE | 8.0 | 1024×600 |
| B080EAN01.1 | AUO | 8.0 | 800×1280 |
| LQ080V3DG01 | SHARP | 8.0 | 640×480 |
| LQ080Y5DG02 | SHARP | 8.0 | 800×480 |
| LSL080AL02-B01 | Samsung | 8.0 | 800×1280 |
| N080ICE-GB0 Rev.B1 | Innolux | 8.0 | 800×1280 |
| N080XCG-L21 | Innolux | 8.0 | 1024×768 |
| TX20D28VM2BAB | KOE | 8.0 | 800×480 |
| A080SN01 V8 | AUO | 8.0 | 800×600 |
| A080SN02 V0 | AUO | 8.0 | 800×600 |
| A080SN03 V0 | AUO | 8.0 | 800×600 |
| AT056TN53 V.1 | Innolux | 5.6 | 640×480 |
| AT080TN52 | Innolux | 8.0 | 800×600 |
| HSD084ISN1-A01 | HannStar | 8.4 | 800×600 |
| HSD100IFW3-A00 | HannStar | 10.1 | 1024×600 |
| PA079DS4 | E Ink | 7.9 | 480×234 |
| PM070WX1 | E Ink | 7.0 | 800×480 |
| TM070RDH13 | Tianma | 7.0 | 800×480 |