| Numéro d'article | CLAC102NA01CW |
| Marque | CPT |
| Taille | 10.2 |
| application | |
| Résolution | 1024×600 |
| Composition | CELL |
| Luminosité | 0 |
| CR | 400:1 |
| Couleurs | 262K |
| Rétroéclairage | No B/L |
| Interface | |
| marque de panneau | CPT |
| modèle de panneau | CLAC102NA01CW |
| type de panneau | a-Si TFT-LCD , CELL |
| taille du panneau | 10.2 inch |
| résolution | 1024(RGB)×600 , WSVGA |
| mode d'affichage | TN, Normally White, Transmissive |
| zone active | 222.72×130.5 mm |
| contour | 230.62×142.5 mm |
| surface | |
| profondeur de verre | 0.60+0.60 mm |
| transmissivité | 6.9% (Typ.)(with Polarizer) |
| Rapport de contraste | 400:1 (Typ.) |
| couleurs d'affichage | 262K (6-bit), CIE193146% |
| Temps de réponse | 25 (Typ.)(Tr+Td) |
| angle de vue | 70/70/40/70 (Typ.)(CR≥10)(L/R/U/D) |
| pilote ic | COG Suggest NT39411 + NT39211, HX8220-1 + HX8677-A |
| rhs : |
| A102VW01 V7 | AUO | 10.2 | 800×480 |
| AT102TN03 V.3 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.8 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.9 | Innolux | 10.2 | 800×480 |
| CLAA102NA0ACG | CPT | 10.2 | 1024×600 |
| CLAA102NA0ACW | CPT | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| CLAA102NB01XV | CPT | 10.2 | 1024×600 |
| EZ102AS181 | PDI | 10.2 | 1024×1280 |
| HSD089IFW3-A00 | HannStar | 8.9 | 1024×600 |
| LQ035Q1DG01 | SHARP | 3.5 | 320×240 |
| LS013B4DN02 | SHARP | 1.35 | 96×96 |
| LS024Q8DD92 | SHARP | 2.4 | 240×320 |
| LTA070B070F | TOSHIBA | 7.0 | 800×480 |
| LTD121KM7K | TOSHIBA | 12.1 | 1400×1050 |
| LTM10C345 | TOSHIBA | 10.4 | 1024×768 |
| OEL9M5003-W-E | Other | 2.7 | 128×64 |
| TFD58W40-F | TOSHIBA | 5.8 | |
| UG-9616TSWCG02 | WiseChip | 0.69 | 96×16 |