| Numéro d'article | CLAA100XB02 CW |
| Marque | CPT |
| Taille | 10.0 |
| application | PAD |
| Résolution | 1024×768 |
| Composition | LCM |
| Luminosité | 300 |
| CR | 800:1 |
| Couleurs | 16.7M |
| Rétroéclairage | WLED |
| Interface | LVDS |
| marque de panneau | CPT |
| modèle de panneau | CLAA100XB02 CW |
| type de panneau | a-Si TFT-LCD , LCM |
| taille du panneau | 10.0 inch |
| résolution | 1024(RGB)×768 , XGA |
| mode d'affichage | TN, Normally White, Transmissive |
| zone active | 202.752×152.064 mm |
| contour | 218.35×175.45 mm |
| surface | Antiglare (Haze 25%), Hard coating (3H) |
| luminosité | 300 cd/m² (Typ.) |
| Rapport de contraste | 800:1 (Typ.) |
| couleurs d'affichage | 16.7M (6-bit + Hi-FRC), CIE193150% |
| Temps de réponse | 25 (Typ.)(Tr+Td) |
| angle de vue | 80/80/60/80 (Typ.)(CR≥10)(L/R/U/D) |
| fréquence | 60Hz |
| type de lampe | 3S13PWLEDWithout Driver |
| interface de signaux | LVDS (1 ch, 8-bit), 40 pins |
| tension d'entrée | 3.3/9.6/18.0/-6.0V (Typ.)(DVDD/AVDD/VGH/VGL) |
| CLAA100XA22XV | CPT | 10.0 | 1024×768 |
| HSD100IXN1-A00 | HannStar | 10.0 | 1024×768 |
| HSD100PXN1-A00-C40 | HannStar | 10.0 | 1024×768 |
| LM100SS1T522 | SHARP | 10.0 | 800×600 |
| LT100AA40000 | TOSHIBA | 10.0 | 800×600 |
| LTM10C353 | TOSHIBA | 10.0 | 1280×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PW100XS1 | E Ink | 10.0 | 640×468 |
| SVA101WV1(01TA)(A) | SVA-NEC | 10.0 | 1024×576 |
| TM100SV-A02-01 | SANYO | 10.0 | 800×600 |
| B101EAN01.5 | AUO | 10.1 | 1280×800 |
| B101UAN01.7 HW2A | AUO | 10.1 | 1920×1200 |
| ED090NA-01H | Innolux | 9.0 | 1280×800 |
| HJ070IA-04K | Innolux | 7.0 | 800×1280 |
| HX121WX1-110 | HYDIS | 12.1 | 1280×800 |
| LP125WH2-SLB3 | LG Display | 12.5 | 1366×768 |
| LPM089A001A | JDI | 8.9 | 2560×1600 |
| LTL101AL06-104 | Samsung | 10.1 | 1280×800 |
| M070SW46 R0 | IVO | 7.0 | 1200×1920 |
| N101ICG-L21 Rev.C1 | Innolux | 10.1 | 1280×800 |